HellermannTyton CCP-SAA Connection Point with SC-APC Simplex Adapter PC, Black

The HellermannTyton CCP - SAA is a top - notch Customer Connection Point. It's crafted from UL 94 V - 0 and UV - stable black polycarbonate and comes with a fully detachable snap - on lid. This closure has two separate cable access points, sealed with a silicon cable entry kit (for cables with diameters between 4.6 mm - 5.6 mm) to achieve an IP68 rating. A GORE - TEX breather membrane on the lid stops condensation in the closure base. You can get it with one SC Simplex or LC Duplex and matching pigtails, and it offers splice management for two heat - shrink splices. Internal fiber management keeps a 30 mm minimum bend radius and stores excess fiber. Key features include full water - sealing with an IP - 68 (NEMA 6P) rating for wall or handhole use, separate inbound/outbound access for cable sealing and segregation, and the ability to connect a home or outdoor device via single - subscriber splice or patch. Technical specs: Max cable diameter is 0.22', min is 0.18', connector type is SC - APC, dimensions are 3.5 x 1.1 x 6.3', there's 1 installed adapter, 0 installed pigtails, 2 splices, and it's black.

Using the HellermannTyton CCP - SAA is easy. First, select the appropriate cable with a diameter between 4.6 mm and 5.6 mm. Insert the cables through the separate inbound and outbound access points, and use the silicon cable entry kit to seal them properly. If you have a home or outdoor device, you can connect it using a single - subscriber splice or patch. When installing, make sure to maintain a 30 mm minimum bend radius for the fibers inside. For maintenance, regularly check the GORE - TEX breather membrane on the lid. If it's dirty or damaged, replace it to prevent condensation. Also, keep an eye on the seals around the cable access points. If you notice any signs of wear, replace the silicon cable entry kit. Store the product in a dry place when not in use to ensure its long - term performance.