Product Description
The Rolls MX34c is a top - notch two - channel microphone mixer that's a game - changer for audio enthusiasts. Originally crafted with video camera operators in mind, it has a wide range of uses. This mixer features balanced XLR inputs, phantom power, and stereo 1/8” (3.5mm) outputs. The 3.5mm output can be switched between mic and line levels. It also comes with a stereo 1/8” (3.5mm) Auxiliary input, perfect for connecting to phones, tablets, or CD players. There's a 3.5mm headset mic input on the front for easy narration. Each channel has a Level and Pan control, and a separate headphone circuit allows you to monitor all signals without affecting the main output. With holes for a shoulder strap, easily accessible controls, and smart Input/Output jack placement, it's ideal for live recording. Key features include 9V Battery or AC adapter operation, 2 Mic Inputs, +18VDC Phantom Power, 3.5mm Stereo Output, 3.5mm Stereo Headphone Output, Pan control on each channel, Auxiliary 3.5mm Input, and a 3.5mm mic in jack for headsets or other mics. Technical specs: Input Impedance - Mic: 600 Ohms or greater (XLR), Aux: 47K stereo (3.5mm); Output Impedance: 50 Ohms; THD + Noise: .02%; S/N Ratio: 110 dB; Frequency Response: 20 Hz - 30 kHz (+0 / -1 dB); Max Output Level: + 14 dB; Max Input Level: +20 dB; Max Gain: +70 dB; Batteries: 2 X 9V Alkaline; Current Draw: 30 mA; Phantom Power: +18 VDC; Input Connectors: 2 Female XLR, 1/8” (3.5mm); Output connectors: 3.5mm Stereo Main Out, 3.5mm Headphone; DC Power Jack: (5.5mm X 2.1mm Tip Negative); Size: 6.3”w x 3.7”d x 1.4”h; Weight: 1 lbs.
Using the Rolls MX34c is a breeze. First, decide if you'll use the 9V battery or the AC adapter to power it up. Connect your microphones to the 2 female XLR inputs. If your mics need phantom power, turn on the +18VDC Phantom Power feature. For additional audio sources like your phone or tablet, use the 3.5mm Auxiliary input. You can adjust the level and pan on each channel to get the perfect audio balance. Use the 3.5mm headset mic input on the front for narration. Plug your headphones into the 3.5mm headphone output to monitor the audio without affecting the main output. When it comes to maintenance, keep it in a dry and clean place. If you're using batteries, replace them regularly to avoid power issues. And always make sure to turn it off when not in use to save power. Also, be gentle with the controls and connectors to prevent any damage.
