Pro Intercom BP2B Two Circuit Binaural Portable Headset Station Beltpack

The Pro Intercom BP2B Beltpack is a top - notch portable headset station. Similar to the BP2, it stands out with two earspeaker amplifiers and a 5 - pin headset XLR at the back. When paired with a dual - muff headset, users can monitor Circuit A in one ear and Circuit B in the other, while the microphone broadcasts to both circuits. Key features include the ability to be worn on the belt or hung on the wall via its robust belt - clip. It allows users to talk and/or listen to one or both circuits at the same time, and it mixes incoming audio from both circuits into one earphone. The ribbed, extruded aluminum case gives it durability. It's plug - in compatible with Clear - Com and other well - known 200 Ohm unbalanced headset intercom systems. Technical specs: Power requirement is 24 - 30VDC, with 10 mA quiescent and 30mA max when the signal lamp is on. Headphone output can accept 8 - 4KW, with 200W being ideal. Microphone input is 200 - 600W Dynamic. Sidetone rejection is over 50dB, and the audio bridging impedance is 200W unbalanced. It measures 3.70 x 4.30 x 2.50 in. (93.98 x 109.22 x 63.5 mm) and weighs 13.5 oz. (0.383 Kg).

Using the Pro Intercom BP2B Beltpack is easy. First, connect it to a power source that meets the 24 - 30VDC requirement. Then, plug in your dual - muff headset. You can wear it on your belt or hang it on the wall using the belt - clip. To monitor different circuits, simply listen to Circuit A in one ear and Circuit B in the other. The microphone will send your voice to both circuits. When using, make sure not to exceed the power or audio input limits. For maintenance, keep it clean and dry. Wipe the aluminum case with a soft cloth regularly. Store it in a cool, dry place when not in use. If you have any issues, check the connections first and make sure they are secure.