Professional Intercom Blazon180 Front-Mounted Rectangular Strobe Light with 180-Degree Visibility
The Blazon180 features a front-mounted rectangular xenon lamp, which restricts the visibility of the flashes to a 180-degree range. It's a great choice for various intercom applications.
Key Features
- A xenon lamp with a 2Hz flash rate, delivering 8 flashes per cycle for clear signals
- Two 3-Pin XLR connectors on the rear panel for easy connection
- A ribbed, extruded aluminum case and glass-filled nylon end bezels for durability
- Powered by the intercom power supply, no need for batteries or other external power sources
Technical Specifications
Supply voltage
24 - 30 VDC nominal
Switch-on voltage
Minimum 8 Volts
Switch-off voltage
Maximum 5 Volts
Switch-on time
75 milliseconds
Switch-off time
4 seconds
Flash rate
2Hz / Flash power
0.75 joules
Input impedance
1 Meg Ohm
Power consumption
Ready - 21.1mA
With strobe - 68 mA
Size
3.70x4.30x5.80 in. (93.98x109.22x147.32 mm)
Weight
20oz. (0.567Kg)
Using the Professional Intercom Blazon180 Strobe Light is easy. First, connect it to your intercom system using the two 3 - Pin XLR connectors on the rear panel. The light gets power from the intercom power supply, so you don't have to worry about batteries. When the intercom activates, the strobe will start flashing at a 2Hz rate, giving 8 flashes per cycle. Remember, the switch - on voltage is at least 8 Volts and the switch - off voltage is at most 5 Volts. Also, the switch - on time is 75 milliseconds and it takes 4 seconds to switch off. For maintenance, keep the ribbed, extruded aluminum case and glass - filled nylon end bezels clean. You can use a soft, dry cloth to wipe it. Avoid exposing it to extreme temperatures or moisture. With proper use and care, this strobe light will serve you well for a long time.
