Product Description
The Panamax M4315-PRO power conditioner is a top - notch device that offers unbeatable AC protection and purification. It features the revolutionary AVM (Automatic Voltage Monitoring) circuit and the exclusive Linear Filtering Technology (LiFT). All eight rear - panel outlets are separately controlled and grouped into four filter - isolated banks. The inclusion of BlueBOLT provides secure, hosted IP system control and monitoring. Key features include a 15 - Amp capacity, fully programmable settings, TCP/IP (BlueBOLT) installed, and an RS - 232 card (included but not installed). It also has linear filtration with different isolation banks for various devices, a front - panel circuit breaker, removable front rack ears, 12 - Volt input triggering, and a detachable 10 - ft. power cord. Technical specifications show it belongs to the Pro Series, has a line voltage of 120 Volts, 9 outlets, and 4 isolated banks. It offers full outlet control via BlueBOLT or Telnet commands, and limited control through front - panel buttons or rear - panel DC trigger. It has comprehensive AC protection and signal - line protection for LAN, Tel, and Cable/Satellite.
Using the Panamax M4315 - PRO is easy. First, connect the detachable 10 - ft. power cord to a power source. Then, plug your electrical devices into the appropriate outlets. You can use the BlueBOLT system or Telnet commands for full control of the outlets, or use the front - panel buttons or rear - panel DC trigger for limited control. When using high - current devices, make sure to plug them into the dedicated high - current outlets. As for maintenance, regularly check the front - panel circuit breaker. If it trips, turn off the connected devices, reset the breaker, and then turn the devices back on. Keep the power conditioner in a cool, dry place to prevent overheating. Avoid exposing it to moisture or extreme temperatures. And remember, this device is designed to protect your equipment, so don't overload the outlets beyond the 15 - Amp capacity.
