Product Description
The Honeywell HW-AV-LTE-M-2 is a cutting - edge fire alarm dual path communicator. It offers unmatched reliability and efficiency for life safety systems. By leveraging Honeywell's Connected Life Safety Services (CLSS) Cloud platform, it smoothly transmits alarm system data from remote sites to Central Monitoring Stations. With LTE CAT - M1 network and LAN capabilities, it provides both single and dual path communication, using dual SIM cards for strong network redundancy. This device is universally compatible, supporting a wide range of fire alarm control panels through its dialer capture interface that recognizes formats like Contact ID, SIA, and 4x2. It integrates well with Honeywell's CLSS platform, allowing real - time event monitoring, remote configuration, and firmware updates via a web - based interface or mobile app. Its advanced design features include great fault reporting and enhanced signal penetration, ensuring non - stop communication even in tough environments. This UL and ETL - listed communicator not only meets but goes beyond industry standards such as NFPA 70 and NFPA 72. With easy installation, strong network support from AT&T and Verizon, and compatibility with mobile devices for remote management, the HW - AV - LTE - M - 2 is a top choice for modern fire alarm systems. Its small size and low power consumption make it a versatile and reliable solution for any facility's fire safety needs. Key Features: Compatible with Honeywell's CLSS Cloud for better monitoring and management; Dual path communication via LTE CAT - M1 and LAN for top reliability; Universal compatibility with dialer interfaces supporting multiple formats; Redundant cellular network support with dual SIM cards for AT&T and Verizon; 5G - ready 'M1' network for excellent signal penetration in buildings; Remote firmware updates and adjustable fault reporting times; Powered directly by a 24V DC fire alarm power supply; Web - based software and mobile app for device configuration and notifications. Technical Specifications: Electrical - Supply Voltage: +12 to +29 VDC, Power Consumption: Standby: 60 mA, Peak: 200 mA, Frequency: LTE CAT - M1 (700/850/1700/1900/2100 MHz); Environment - Operating Temperature: 32°F to 120°F, Relative Humidity: 1% to 85% Non - condensing; Physical - Dimensions: 3.54' L x 2.48' W x 1.26' D, Weight (without antenna): 2.56 oz, RoHS: Yes; Network Providers - AT&T (North America), Verizon (North America), Other local providers; Agency Listings and Approvals - UL Listed for UL864 Standard (S35608), ETL Listed for UL864 & UL1610 Standard (5013005), FCC, CSFM: 7300 - 1637: 0511, FDNY: 2022 - TMCOAP - 001312 - CERT, LAFD; Standards and Codes - National Fire Protection Association: NFPA 70, NFPA 72. What’s Included: HW - AV - LTE - M - 2 Communicator, Antenna, User Manual.
Using the Honeywell HW - AV - LTE - M - 2 is easy. First, install it near your fire alarm control panel. Connect it to a 24V DC fire alarm power supply as it's directly powered by it. Insert the dual SIM cards for AT&T or Verizon or other local providers to enable redundant cellular network support. Then, connect it to the LAN if you want to use the dual - path communication feature. You can configure the device through the web - based software or the mobile app. You'll be able to monitor real - time events, adjust settings, and even update the firmware remotely. When it comes to maintenance, keep it in an environment with a temperature between 32°F and 120°F and relative humidity from 1% to 85% non - condensing. Check the power supply regularly to make sure it's within the +12 to +29 VDC range. Also, if you receive any fault reports, adjust the reporting times according to your needs. If you have any issues, refer to the user manual that comes with the device.
