DBX ZC-BOB Breakout Box for DriveRack and ZonePro

The DBX ZC - BOB Breakout Box enhances the DriveRack and ZonePro families. Zone Controllers add extra functionality, using analog DC voltage for various logic controls like zone source selection, volume adjustment, muting, program or scene selection, and fire - safety muting. Wired with common and affordable CAT5 cable and RJ - 45 connectors up to 1000 ft, it offers simple and effective solutions for contractors. The ZC - BOB enables 'home run' or parallel wiring to DriveRack and ZonePRO devices. This device features up to 6 RJ - 45 input jacks for ZC wall panel controllers and one output jack for connection to DriveRack or ZonePRO. Technical specs include specific connector details, cable length limits for different wiring methods, and safety certifications like UL 60065, IEC 60065, EN 55013, E60065. All details are subject to change without notice. Recommended for installations.

Using the DBX ZC - BOB Breakout Box is quite straightforward. First, connect your ZC wall panel controllers to the input RJ - 45 jacks on the device. You can use either 'home run' or parallel wiring configurations. Then, connect the output RJ - 45 jack to your DriveRack or ZonePRO device. When it comes to wiring, make sure to use CAT5 or CAT5E cable with the specified nominal DCR. The maximum cable length depends on the number of Zone Controllers you're using, so check the technical specs for details. As for maintenance, keep the device in a dry and clean place. Avoid exposing it to extreme temperatures or humidity. Also, be aware that all product information can change without notice, so stay updated. And remember, this product is recommended for installations, so if you're not an installer, you might want to consult a professional.