The Datavideo ITC-100SL Beltpack is designed for use with ITC-100/200 systems. It offers a communication distance of up to 200m, making it suitable for various applications. The beltpack comes with a bi-colour tally LED. The ITC-100 includes 4 ITC-100SL Belt Packs, along with TD-3 Camera Tally Light, CB-3 20M Cable, and MC-1 Headset / Microphone. It has a 5 Pin XLR Connector input, a 3.5mm Stereo Jack Socket for headset/microphone combination (headset impedance 8 - 600 ohms, 100mW min, microphone level -67dB) or a 2.5mm Stereo Jack Socket for Motorola Mobile phone type headsets. The frequency response is 550 - 3.6KHz with < +/-3dB, THD < 3%, and S/N 50dB. There's a 3.5mm Jack Socket for tally out to connect to TD-2 or TD-3. The bi-color tally LED shows RED for LIVE and GREEN for CUED. The power LED indicates power reception. It operates within a range of up to 200m between the base station and the slave, in a temperature range of 5 - 40C. Dimensions are 114 x 97 x 35 mm and it weighs 0.3 kg. The package includes 1 ITC-100SL Belt Pack, 1 ITC-100SL Carry Case, 1 headset with microphone, 1 tally LED indicator, 1 GPI Cable, 1 5-pin XLR to XLR cable, 1 earphone cable, 1 black Velcro, 1 Velcro, and 1 thank you card.
Using the Datavideo ITC-100SL Beltpack is easy. First, make sure to connect the appropriate cables to the input and output sockets as per your setup. For the headset or microphone, use the 3.5mm or 2.5mm stereo jack socket depending on your device. The beltpack will work within a 200m range from the base station, so keep that in mind when positioning. The bi-color tally LED will show you the status, with red for live and green for cued. When it comes to power, the power LED will light up when it's receiving power. As for maintenance, keep it in a dry place and avoid exposing it to extreme temperatures outside the 5 - 40C range. If you're not using it, store it in the provided carry case. Also, handle the cables gently to prevent damage.
